DXF to G-code
Turn DXF outlines into laser/engraving G-code — feed, laser commands and per-layer mapping, generated in your browser.
Processing and data safety
Section titled “Processing and data safety”This tool runs entirely in your browser — your files are never uploaded to a server.
Input and output
Section titled “Input and output”- Formats: DXF, GCODE, NC
- Flow: DXF outlines → laser / engraving G-code
How to use
Section titled “How to use”- Open a DXF file (dropzone — no paste box).
- Set feed rate, power and laser on/off commands (optionally register tools in the tool library).
- Map each DXF layer to an operation — cut / engrave / exclude — with per-layer feed & power overrides if needed.
Key details and limits
Section titled “Key details and limits”- Optimized for 2D cutting/engraving.
- Arcs are approximated as polylines (64 segments per full circle, sampled proportionally to the sweep angle).
- Entity types outside the toolpath whitelist (e.g. SPLINE/INSERT/HATCH) produce no toolpath — the result panel reports per-type counts, including types the parser silently drops such as HATCH.
Common use cases
Section titled “Common use cases”- Drop in a DXF → export the .nc toolpath