Skip to content
Vecaria
Go Pro

How to Convert Gerber to PNG

Converting Gerber artwork to PNG is how a board gets into documentation, a review email or a photo exposure workflow, without anyone needing an EDA tool. This guide explains the choices and links to the tool that does it locally in your browser.

Gerber is a plotter format — fabricators love it, but a PCB review deck, a datasheet or a wiki page cannot display it. PNG is the universal raster answer. One PNG per layer also matches how boards are reviewed: you check copper top, copper bottom and drill separately, not fused.

Gerber to PNG renders RS-274X artwork and Excellon drill files to PNG entirely in your browser — files are dropped in and rasterised locally, never uploaded.

  • One PNG per file, not a fused multi-layer image — each layer is exported separately, exactly as it came in
  • Resolution — pick a 2×/4× multiplier or an exact long-edge pixel value (total scale cap 8×, never below native size); for documentation 2× is usually enough, for photo exposure use the highest value your board needs
  • Transparent background — optional, off by default (white background, black traces)
  • Batch — drop up to 10 files and get a ZIP, with failed files listed instead of aborting the run
  • Preview before download — the file renders on the page first, so a wrong layer or scale is visible before anything is saved

RS-274X and Excellon are supported; RS-274D artwork may not render. Very dense boards produce very large images — that is inherent to rasterising fine pitch at high resolution. Multi-layer overlay is not what this tool does (that is the stackup tool above); it is deliberately one file, one image.